Milk pumps

The installation site of the pump is a GEA milk suction unit with a non-return valve in the pressure pipeline. All parts of the pump that come into contact with milk are made of stainless steel AISI 304. It has an additional pipe for connecting a milk dispenser with a diameter of 12 mm. Pump performance is 10 m³/h. Characteristics of the electric motor: power – 1.1 kW, voltage – 380 V. Inlet pipe – diameter 40 mm, outlet pipe – clamp connection DN 25 AISI 304.

Place of installation of NMU-6N/13 pump – milk discharger.
All parts of the pump that come in contact with milk are made of stainless steel.
It has an additional connection for the connection of the milk discharger – Ø16mm.
Pump capacity -13 m3/h. Electric motor characteristics – N=1.5 kW, I=380 V.
Inlet pipe – Ø40mm, outlet pipe – Ø35mm. It has a modification of the outlet pipe with a DN40 DIN nut for connecting the FM-3 filter.

Place of installation of NMU-6N/10GDZ-02 pump – milk discharger.
All parts of the pump that come in contact with milk are made of stainless steel.
It has an additional connection for the connection of the milk discharger – Ø16mm.
Pump capacity -10 m3/h. Electric motor characteristics – N=1.1 kW, I=380 V.
The inlet pipe is Ø40mm, the outlet pipe is a threaded fitting for a milk coupling DN40 DIN.
Equipped with a rubber check cone valve with a spring.

NMU-6N/15M Pump
Designed for pumping milk from the cooler to the milk truck.
All parts of the pump that come in contact with milk are made of stainless steel.
Pump capacity -15 m3/h.
Electric motor characteristics – N=2.2 kW, I=380V.
Inlet pipe (dismountable) – Ø40mm, outlet pipe (dismountable) – Ø38mm.

NMU-6N/10GDZ-01-L Pump (left rotation of the pump)
Place of installation of NMU-6N/ 10GDZ pump – milk discharger. All parts of the pump that come in contact with milk are made of stainless steel. It has an additional connection for the connection of the milk discharger – Ø16mm. Pump capacity -10 m3/h. Electric motor characteristics – N=1.1 kW, I=380 V. Equipped with rubber check valve.

NMU-6N/25 Pump
Designed for pumping milk from the cooler to the milk truck.
All parts of the pump that come in contact with milk are made of stainless steel.
Pump capacity -25 m3/h.
Electric motor characteristics – N=5.5 kW, I=380V.
Inlet pipe (dismountable) – Ø50mm, outlet pipe (dismountable) – Ø50mm.

NMU-6N-01 Pump
Place of installation of NMU-6Н-01 pump – milk discharger. All parts of the pump that come in contact with milk are made of stainless steel. Pump capacity -6.5 m3/h. Electric motor characteristics – N=0.75kW, I=380V. Inlet pipe – Ø40mm, outlet pipe – Ø22mm -add word outside diameter. Equipped with a rubber cone check valve with spring.

NMU-6N/10 Pump
Designed for pumping milk from the cooler to the milk truck. All parts of the pump that come in contact with milk are made of stainless steel. Pump capacity -10 m3/h. Electric motor characteristics – N=1.1 kW.,I=380V. Inlet pipe – Ø40mm., outlet pipe – Ø38mm., – add word outside diameter. Equipped with rubber check valve.

NMU-6N Pump
Place of installation of NMU-6N pump – milk discharger. All parts of the pump that come in contact with milk are made of stainless steel. Pump capacity -6.5 m3/h. Electric motor characteristics – N=0.75kW.,I=380V. Inlet pipe – Ø40mm., outlet pipe – Ø22mm., – addword outside diameter. Equipped with rubber check valve.

Designed for pumping milk from the cooler to the milk tank.
All parts of the pump that come into contact with milk are made of stainless steel.
Pump capacity -15 m3/h.
Electric motor characteristics – N=2.2 kW, I=380 V.
Inlet pipe – Ø40mm, outlet pipe – Ø38mm.