Milking equipment and spare parts for milking equipment

Circulation heating device (CHU) is designed for circulation and heating of water in a circular pipeline in auto-watering systems of cold rooms for cattle, horses, pigs and sheep. The heating element bulb is made of stainless steel mounted on a base made of conductive
material.
The power supply voltage of the CHU is 380 V.
The power of the installed heater is 6 kW. The heating element is equipped with a temperature sensor enabling to maintain the water temperature automatically within the set range.
The CHU has a light indication of the current stage and digital indication of the adjusted water
temperature. Electrical elements of the CHU are protected against short circuit and current leakage.
CHU’s are produced in 2 versions:
– CHU-1 for pipelines up to 200 meters long (circulation pump power up to 100W);
– CHU-2 for pipelines up to 400 meters long (circulation pump power up to 410W).
Overall dimensions, mm (DxWxH):
– CHU-1 – 600х550х250;
– CHU-2 – 600х570х280.

Shells are designed for installation of teat rubber and transfer of vacuum effect on its walls. The shell is made of stainless steel 2mm thick.
The diameter of the hole for the installation of the nipple rubber – 41mm, for the installation of the milk outlet – 18mm. The outer diameter of the vacuum-diverting pipe is 9 mm. Overall dimensions of the cup, mm DxDiam: 191х45.
*Dimensions at the request of the Customer.

Milk collector is designed for milk collection from milk cups and further evacuation of milk from milk chamber into milk pipe or milking bucket. The collector has two chambers – a chamber of constant vacuum (milk collecting chamber), located between the base of the collector and the cover and a chamber of variable vacuum located in the distributor. The base of the collector is made in the form of a bowl with 4 spigots (outer diameter of spigots is 14mm) and is made of high quality stainless steel AISI 304. The collector cover is made of high-strength transparent polycarbonate with an outlet spigot of 21mm. The distributor is made of highly reinforced plastic with outer diameter (9-10mm). All parts of the collector manifold are made of food grade materials.

Milk collector is designed for milk collection from milk cups and further evacuation of milk from milk chamber into milk pipe or milking bucket. The collector has two chambers – a chamber of constant vacuum (milk collecting chamber), located between the base of the collector and the cover and a chamber of variable vacuum located in the distributor. The base of the collector is made in the form of a bowl with 4 spigots (outer diameter of spigots is 14mm) and is made of high quality stainless steel AISI 304. The collector cover is made of high-strength transparent polycarbonate with an outlet spigot of 21mm. The distributor is made of highly reinforced plastic with outer diameter (9-10mm). All parts of the collector manifold are made of food grade materials

The unbreakable KAD-250 collector lid is designed for pair and simultaneous milking collectors with a volume of 240/250 ml.

350 ml, for synchronous milking machines

250 ml, for synchronous milking machines

250 ml, for synchronous milking machines